{"title":"Jeep","description":null,"products":[{"product_id":"jeep-wrangler-gladiator-rock-slider-snap-on-step","title":"Jeep Wrangler \/ Gladiator Rock Slider Snap On Step","description":"\u003cp\u003eAvailable in Red and Black !!\u003c\/p\u003e\u003cp\u003eIntroducing the Jeep Rock Slider Step, a removable snap on step designed for Jeep rock sliders. This version is available in custom lengths from 5 in to 10 in to match your exact setup. The 5 in model has been tested to 800 lb under controlled conditions with no breaking.\u003c\/p\u003e\u003cp\u003eEach step is made from durable ABS that withstands outdoor conditions and direct sunlight. The foot pad is 3.8 in deep, giving you solid footing while keeping a compact profile. The design provides proper clearance so your rock sliders contact obstacles before the step, reducing impact during normal use.\u003c\/p\u003e\u003cp\u003eThere must be at least 5 mm of clearance between your body panels and rock guards for proper fitment. 5 mm is approximately 0.20 in. Please verify clearance before ordering.\u003c\/p\u003e\u003cp\u003eNo tools are required for installation. The step snaps on in seconds and locks into place with a secure clamping design that prevents sliding or movement. When heading off road, it can be removed just as quickly.\u003c\/p\u003e\u003cp\u003eHow to install:\u003cbr\u003ePosition the step onto the rock slider and press it into place until fully seated. Ensure it is snug and secure before use. To remove, pull upward firmly until it releases from the slider.\u003c\/p\u003e\u003cp\u003eReturns:\u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 25 percent restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer\u003cbr\u003eOur 3D printed steps are designed and tested to support up to 800 lb on the 5 in model under controlled conditions. Due to the nature of 3D printing, variations in material strength, performance, and durability can occur. Factors such as printing conditions, temperature, UV exposure, moisture, installation method, and usage affect performance. These steps are intended for static applications and are not built for high impact or dynamic loads. By installing and using this product, you accept full responsibility and assume all risks associated with its use. The manufacturer is not liable for damages, injuries, or losses resulting from manufacturing variances, improper installation, environmental factors, or misuse.\u003c\/p\u003e\u003cp\u003eLimited Warranty\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is installed and used as intended. It does not cover incorrect installation, misuse, modifications, abnormal environmental exposure, or inherent inconsistencies of the 3D printing process. If a defect is determined to be due to design or manufacturing, contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Liability is limited to these remedies. By purchasing and using this product, you acknowledge that use is at your own risk.\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"5\" \/ 1 Step","offer_id":50613862891585,"sku":null,"price":74.99,"currency_code":"USD","in_stock":true},{"title":"5\" \/ 2 Step","offer_id":50613862924353,"sku":null,"price":124.99,"currency_code":"USD","in_stock":true},{"title":"5\" \/ 4 Step","offer_id":50613862957121,"sku":null,"price":219.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 1 Step","offer_id":50613862989889,"sku":null,"price":94.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 2 Step","offer_id":50613863022657,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 4 Step","offer_id":50613863055425,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 1 Step","offer_id":50613863088193,"sku":null,"price":114.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 2 Step","offer_id":50613863120961,"sku":null,"price":209.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 4 Step","offer_id":50613863153729,"sku":null,"price":259.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 1 Step","offer_id":50613863186497,"sku":null,"price":139.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 2 Step","offer_id":50613863219265,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 4 Step","offer_id":50613863252033,"sku":null,"price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.7827474796_fupx.jpg?v=1791181730"},{"product_id":"2-drop-jeep-wrangler-gladiator-rock-slider-snap-on-step","title":"2\" Drop Jeep Wrangler \/ Gladiator Rock Slider Snap On Step","description":"\u003cp\u003eIntroducing the Lowered Rock Guard Step, a removable snap on step designed for Jeep rock guards. This version sits 2.5 in lower than our standard rock guard step for easier entry and exit, while keeping the same protective design. It is available in 7 in, 10 in, and 13 in lengths to match your exact setup.\u003c\/p\u003e\u003cp\u003eEach step is made from durable ABS that withstands outdoor conditions and direct sunlight. The foot pad is 3.8 in deep, giving you solid footing while keeping a compact profile. The design provides proper clearance so your rock guards contact obstacles before the step, reducing impact during normal use.\u003c\/p\u003e\u003cp\u003eThere must be at least 5 mm of clearance between your body panels and rock guards for proper fitment. 5 mm is approximately 0.20 in. Please verify clearance before ordering.\u003c\/p\u003e\u003cp\u003eNo tools are required for installation. The step snaps on in seconds and locks into place with a secure clamping design that prevents sliding or movement. When heading off road, it can be removed just as quickly.\u003c\/p\u003e\u003cp\u003eHow to install:\u003cbr\u003ePosition the step onto the rock guard and press it into place until fully seated. Ensure it is snug and secure before use. To remove, pull upward firmly until it releases from the guard.\u003c\/p\u003e\u003cp\u003eReturns:\u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 25 percent restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer:\u003cbr\u003eOur 3D printed steps are designed for everyday use under normal conditions. Due to the nature of 3D printing, variations in material strength, performance, and durability can occur. Factors such as printing conditions, temperature, UV exposure, moisture, installation method, and usage affect performance. These steps are intended for static applications and are not built for high impact or dynamic loads. By installing and using this product, you accept full responsibility and assume all risks associated with its use. The manufacturer is not liable for damages, injuries, or losses resulting from manufacturing variances, improper installation, environmental factors, or misuse.\u003c\/p\u003e\u003cp\u003eLimited Warranty:\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is installed and used as intended. It does not cover incorrect installation, misuse, modifications, abnormal environmental exposure, or inherent inconsistencies of the 3D printing process. If a defect is determined to be due to design or manufacturing, contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Liability is limited to these remedies. By purchasing and using this product, you acknowledge that use is at your own risk.\u003cbr\u003eI left out a load rating since the original listed an 800 lb test on its 5 in model. Let me know if you've tested the lowered version and want a specific number in there, or if you'd rather leave it out entirely.You said: I want a 25% increse in price\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"7\" \/ 1 Step","offer_id":50613863284801,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 2 Step","offer_id":50613863317569,"sku":null,"price":179.0,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 4 Step","offer_id":50613863350337,"sku":null,"price":299.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 1 Step","offer_id":50613863383105,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 2 Step","offer_id":50613863415873,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 4 Step","offer_id":50613863448641,"sku":null,"price":325.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 1 Step","offer_id":50613863481409,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 2 Step","offer_id":50613863514177,"sku":null,"price":379.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 4 Step","offer_id":50613863546945,"sku":null,"price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.8205190803_9obb.jpg?v=1791181731"},{"product_id":"extra-cup-holder-for-4th-gen-jeep-wrangler","title":"Extra Cup Holder for 4th Gen Jeep Wrangler","description":"\u003cp\u003eThis cup holder is designed for the 4th Gen Jeep Wrangler (JL). It slides directly into the passenger seat rails and locks in place with no drilling or permanent modification.\u003cbr\u003eIt installs on the passenger side only. The passenger seat must be positioned slightly past halfway back or farther for proper fit. The seat is fully adjustable, but the holder requires that rearward position to clear the center console area.\u003cbr\u003eIt is sized to fit a YETI 26 oz tumbler and smaller bottles or cups. The fit keeps your drink stable during daily driving, trail use, and normal turns. It does not get in the way of the passenger when installed in the correct seat position.\u003cbr\u003eEach unit is 3D printed from durable material with strong layer orientation for long term use.\u003cbr\u003eIf you want a custom size for a different bottle, tumbler, layout, or color, message me. I am happy to make a custom version for your setup.\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"Stanley 40oz (3\")","offer_id":50613863645249,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"Standard (3 1\/4\")","offer_id":50613863678017,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"Yeti 26oz (3 7\/16\")","offer_id":50613863710785,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"HydroFlask 32\/40oz","offer_id":50613863743553,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.8075179489_i8tx.jpg?v=1791181733"}],"url":"https:\/\/jt3dsignllc-printing.com\/collections\/jeep.oembed","provider":"JT3Dsign LLC","version":"1.0","type":"link"}