{"title":"Rock Slider Steps","description":null,"products":[{"product_id":"chevy-colorado-steps-for-rock-sliders","title":"Chevy Colorado Steps for Rock Sliders","description":"\u003cp\u003eIntroducing the Chevy Colorado Steps for Rock Sliders—a removable step designed for the Chevy Colorado ZR2 (3rd gen) and GMC Colorado. Made from durable ABS, these steps withstand outdoor conditions and direct sunlight.\u003c\/p\u003e\u003cp\u003eThey feature ample clearance so the rock guards engage before the step, reducing impact. A wedge mechanism with three screws secures the step against the rock guard, preventing any sliding. Tested to hold up to 650 lb and requiring a 45 lb upward force to remove, they deliver solid stability and can be quickly detached with a 4mm Allen wrench for going on the trails.\u003c\/p\u003e\u003cp\u003eHere is a complete video of it in action: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=93Gmmkg78r0\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/www.youtube.com\/watch?v=93Gmmkg78r0\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eHow to install: \u003cbr\u003ePosition the step onto the rock sliders and use the Allen wrench, turning it counterclockwise, to tighten the step until it is snug. To remove the step, turn the Allen wrench clockwise until the screws bottom out, then lift the step off.\u003c\/p\u003e\u003cp\u003eReturns: \u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 15% restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer\u003cbr\u003eOur 3D printed steps are designed and tested to support over 600 lb of load under controlled conditions. However, due to the nature of 3D printing, there may be variations in material strength, performance, and durability. Factors such as the printing process, environmental conditions (like temperature, UV exposure, and moisture), and the way the product is installed or used can affect its overall performance. These steps are intended for static applications and are not built for high-impact or dynamic loads. By installing and using this product, you accept full responsibility and assume all risks associated with its performance. The manufacturer is not liable for any damages, injuries, or losses that result from manufacturing variances, improper installation, environmental factors, or misuse.\u003c\/p\u003e\u003cp\u003eLimited Warranty\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is used and installed as intended. It does not cover issues arising from incorrect installation, misuse, modifications, or environmental exposure beyond normal conditions, nor does it cover the inherent inconsistencies of the 3D printing process. If you experience a defect that is determined to be due to design or manufacturing, please contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Our liability is limited solely to these remedies, and we are not responsible for any incidental or consequential damages. By purchasing and using these steps, you acknowledge and agree that you are doing so at your own risk.\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"2x \/ I agree","offer_id":43222682894401,"sku":null,"price":124.99,"currency_code":"USD","in_stock":true},{"title":"2x \/ I disagree","offer_id":43222682927169,"sku":null,"price":124.99,"currency_code":"USD","in_stock":false},{"title":"4x \/ I agree","offer_id":43222682959937,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"4x \/ I disagree","offer_id":43222682992705,"sku":null,"price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.6708468778_dfnd.jpg?v=1791181720"},{"product_id":"chevy-colorado-top-rail-rock-guard-step","title":"Chevy Colorado Top-Rail Rock Guard Step","description":"\u003cp\u003eIntroducing the Chevy Colorado Top-Rail Rock Guard Step — the next evolution of convenient access for the Chevy Colorado ZR2 3rd gen and GMC Canyon. This redesigned version mounts on the top rail of the factory rock guards, raising your foot placement for improved leverage when accessing roof racks, rooftop tents, recovery boards, or any cargo stored up high. It also provides a clean and safe stepping point for entering and exiting the vehicle, helping prevent paint scratches on the interior door panel edge.\u003c\/p\u003e\u003cp\u003eUnlike traditional bolt-on or rail-clamp steps, this model uses a fully tool-less clip-on locking system that installs and removes in seconds. Its secure engagement points ensure it stays firmly in place during everyday use while still being easily removable before hitting the trails. Built from durable, UV-resistant ABS, it is engineered to handle real outdoor conditions without cracking or degrading in direct sunlight. Standard sizing options are available in 4 inch, 5 inch, and 6 inch widths, and if you need a specific custom width, I can make it to order to suit your exact setup and comfort.\u003c\/p\u003e\u003cp\u003eTested to support 1,000 lb of static load during in-house testing, the step showed no signs of warping, cracking, or surface damage to the plastic. Testing was stopped at 1,000 lb only to avoid placing excessive force on the truck during the test. Whether you’re loading gear, climbing in and out, or simply giving yourself a boost into the truck, this upgrade adds capability without drilling, permanent modification, or the hassle of bulky running boards.\u003c\/p\u003e\u003cp\u003eReturns:\u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 15% restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer\u003cbr\u003eBy purchasing these steps, you agree that they are intended for static use only and acknowledge the natural variations that can occur in 3D-printed products. Material strength, long-term durability, and performance may vary depending on environmental factors such as temperature, UV exposure, and moisture, as well as installation and usage conditions. High-impact or dynamic loads are not recommended. You assume full responsibility for proper installation, use, and safety when operating or standing on this product. JT3Dsign LLC is not liable for any damages, injuries, or losses arising from improper use, installation, environmental effects, or manufacturing variances.\u003c\/p\u003e\u003cp\u003eLimited Warranty\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is used and installed as intended. It does not cover issues arising from incorrect installation, misuse, modifications, or environmental exposure beyond normal conditions, nor does it cover the inherent inconsistencies of the 3D printing process. If you experience a defect that is determined to be due to design or manufacturing, please contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Our liability is limited solely to these remedies, and we are not responsible for any incidental or consequential damages. By purchasing and using these steps, you acknowledge and agree that you are doing so at your own risk.\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"4 inches \/ 2 Steps","offer_id":43222686924865,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"4 inches \/ 4 Steps","offer_id":43222686957633,"sku":null,"price":170.0,"currency_code":"USD","in_stock":true},{"title":"4 inches \/ 1 Step","offer_id":43222686990401,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"5 inches \/ 2 Steps","offer_id":43222687023169,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"5 inches \/ 4 Steps","offer_id":43222687055937,"sku":null,"price":190.0,"currency_code":"USD","in_stock":true},{"title":"5 inches \/ 1 Step","offer_id":43222687088705,"sku":null,"price":65.0,"currency_code":"USD","in_stock":true},{"title":"6 inche \/ 2 Steps","offer_id":43222687121473,"sku":null,"price":110.0,"currency_code":"USD","in_stock":true},{"title":"6 inche \/ 4 Steps","offer_id":43222687154241,"sku":null,"price":210.0,"currency_code":"USD","in_stock":true},{"title":"6 inche \/ 1 Step","offer_id":43222687187009,"sku":null,"price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.7388667369_686x_ca70c41d-027f-417a-af70-f882484ee05b.jpg?v=1791181745"},{"product_id":"jeep-wrangler-gladiator-rock-slider-snap-on-step","title":"Jeep Wrangler \/ Gladiator Rock Slider Snap On Step","description":"\u003cp\u003eAvailable in Red and Black !!\u003c\/p\u003e\u003cp\u003eIntroducing the Jeep Rock Slider Step, a removable snap on step designed for Jeep rock sliders. This version is available in custom lengths from 5 in to 10 in to match your exact setup. The 5 in model has been tested to 800 lb under controlled conditions with no breaking.\u003c\/p\u003e\u003cp\u003eEach step is made from durable ABS that withstands outdoor conditions and direct sunlight. The foot pad is 3.8 in deep, giving you solid footing while keeping a compact profile. The design provides proper clearance so your rock sliders contact obstacles before the step, reducing impact during normal use.\u003c\/p\u003e\u003cp\u003eThere must be at least 5 mm of clearance between your body panels and rock guards for proper fitment. 5 mm is approximately 0.20 in. Please verify clearance before ordering.\u003c\/p\u003e\u003cp\u003eNo tools are required for installation. The step snaps on in seconds and locks into place with a secure clamping design that prevents sliding or movement. When heading off road, it can be removed just as quickly.\u003c\/p\u003e\u003cp\u003eHow to install:\u003cbr\u003ePosition the step onto the rock slider and press it into place until fully seated. Ensure it is snug and secure before use. To remove, pull upward firmly until it releases from the slider.\u003c\/p\u003e\u003cp\u003eReturns:\u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 25 percent restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer\u003cbr\u003eOur 3D printed steps are designed and tested to support up to 800 lb on the 5 in model under controlled conditions. Due to the nature of 3D printing, variations in material strength, performance, and durability can occur. Factors such as printing conditions, temperature, UV exposure, moisture, installation method, and usage affect performance. These steps are intended for static applications and are not built for high impact or dynamic loads. By installing and using this product, you accept full responsibility and assume all risks associated with its use. The manufacturer is not liable for damages, injuries, or losses resulting from manufacturing variances, improper installation, environmental factors, or misuse.\u003c\/p\u003e\u003cp\u003eLimited Warranty\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is installed and used as intended. It does not cover incorrect installation, misuse, modifications, abnormal environmental exposure, or inherent inconsistencies of the 3D printing process. If a defect is determined to be due to design or manufacturing, contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Liability is limited to these remedies. By purchasing and using this product, you acknowledge that use is at your own risk.\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"5\" \/ 1 Step","offer_id":50613862891585,"sku":null,"price":74.99,"currency_code":"USD","in_stock":true},{"title":"5\" \/ 2 Step","offer_id":50613862924353,"sku":null,"price":124.99,"currency_code":"USD","in_stock":true},{"title":"5\" \/ 4 Step","offer_id":50613862957121,"sku":null,"price":219.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 1 Step","offer_id":50613862989889,"sku":null,"price":94.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 2 Step","offer_id":50613863022657,"sku":null,"price":144.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 4 Step","offer_id":50613863055425,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 1 Step","offer_id":50613863088193,"sku":null,"price":114.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 2 Step","offer_id":50613863120961,"sku":null,"price":209.99,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 4 Step","offer_id":50613863153729,"sku":null,"price":259.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 1 Step","offer_id":50613863186497,"sku":null,"price":139.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 2 Step","offer_id":50613863219265,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 4 Step","offer_id":50613863252033,"sku":null,"price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.7827474796_fupx.jpg?v=1791181730"},{"product_id":"2-drop-jeep-wrangler-gladiator-rock-slider-snap-on-step","title":"2\" Drop Jeep Wrangler \/ Gladiator Rock Slider Snap On Step","description":"\u003cp\u003eIntroducing the Lowered Rock Guard Step, a removable snap on step designed for Jeep rock guards. This version sits 2.5 in lower than our standard rock guard step for easier entry and exit, while keeping the same protective design. It is available in 7 in, 10 in, and 13 in lengths to match your exact setup.\u003c\/p\u003e\u003cp\u003eEach step is made from durable ABS that withstands outdoor conditions and direct sunlight. The foot pad is 3.8 in deep, giving you solid footing while keeping a compact profile. The design provides proper clearance so your rock guards contact obstacles before the step, reducing impact during normal use.\u003c\/p\u003e\u003cp\u003eThere must be at least 5 mm of clearance between your body panels and rock guards for proper fitment. 5 mm is approximately 0.20 in. Please verify clearance before ordering.\u003c\/p\u003e\u003cp\u003eNo tools are required for installation. The step snaps on in seconds and locks into place with a secure clamping design that prevents sliding or movement. When heading off road, it can be removed just as quickly.\u003c\/p\u003e\u003cp\u003eHow to install:\u003cbr\u003ePosition the step onto the rock guard and press it into place until fully seated. Ensure it is snug and secure before use. To remove, pull upward firmly until it releases from the guard.\u003c\/p\u003e\u003cp\u003eReturns:\u003cbr\u003eReturns are accepted within 14 days of the delivery date provided the item is new, unused, and in original condition. A 25 percent restocking fee will be deducted from the refund.\u003c\/p\u003e\u003cp\u003eDisclaimer:\u003cbr\u003eOur 3D printed steps are designed for everyday use under normal conditions. Due to the nature of 3D printing, variations in material strength, performance, and durability can occur. Factors such as printing conditions, temperature, UV exposure, moisture, installation method, and usage affect performance. These steps are intended for static applications and are not built for high impact or dynamic loads. By installing and using this product, you accept full responsibility and assume all risks associated with its use. The manufacturer is not liable for damages, injuries, or losses resulting from manufacturing variances, improper installation, environmental factors, or misuse.\u003c\/p\u003e\u003cp\u003eLimited Warranty:\u003cbr\u003eWe offer a limited warranty on our 3D printed steps for 180 days from the date of purchase. This warranty covers defects in materials or workmanship when the product is installed and used as intended. It does not cover incorrect installation, misuse, modifications, abnormal environmental exposure, or inherent inconsistencies of the 3D printing process. If a defect is determined to be due to design or manufacturing, contact us with detailed photos and a description of the issue. At our discretion, we will repair, replace, or refund the product. Liability is limited to these remedies. By purchasing and using this product, you acknowledge that use is at your own risk.\u003cbr\u003eI left out a load rating since the original listed an 800 lb test on its 5 in model. Let me know if you've tested the lowered version and want a specific number in there, or if you'd rather leave it out entirely.You said: I want a 25% increse in price\u003c\/p\u003e","brand":"JT3Dsign LLC","offers":[{"title":"7\" \/ 1 Step","offer_id":50613863284801,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 2 Step","offer_id":50613863317569,"sku":null,"price":179.0,"currency_code":"USD","in_stock":true},{"title":"7\" \/ 4 Step","offer_id":50613863350337,"sku":null,"price":299.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 1 Step","offer_id":50613863383105,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 2 Step","offer_id":50613863415873,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true},{"title":"10\" \/ 4 Step","offer_id":50613863448641,"sku":null,"price":325.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 1 Step","offer_id":50613863481409,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 2 Step","offer_id":50613863514177,"sku":null,"price":379.0,"currency_code":"USD","in_stock":true},{"title":"13\" \/ 4 Step","offer_id":50613863546945,"sku":null,"price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/8106\/9633\/files\/il_fullxfull.8205190803_9obb.jpg?v=1791181731"}],"url":"https:\/\/jt3dsignllc-printing.com\/collections\/rock-slider-steps.oembed","provider":"JT3Dsign LLC","version":"1.0","type":"link"}